Furnace Pros Colorado logo Furnace Pros Colorado
Get Estimate
Browse Services
Service Areas
Call (833) 588-3896

Furnace Repair in Colorado: Heat Back On Today

Furnace Repair in Colorado means getting heat back before the house drops below 60. Our techs carry igniters, flame sensors, blower motors and control boards on every truck, so most Colorado homes get fixed in one visit. We cover Denver, Colorado Springs, Grand Junction, Fort Collins and the mountain towns in between.

  • Licensed & Insured
  • Transparent Pricing
  • Same-Day Service
  • 24/7 Emergency
Call For Service Or get a free estimate
Licensed Licensed & Bonded
Fully Insured Insured & Bonded
24/7 Emergency Same-Day Response
Warranty Backed Workmanship Guaranteed
A technician inspects an outdoor HVAC unit for maintenance.
On the job

15+

Years Local Trade

Statewide Furnace Repair in Colorado

Furnace Pros Colorado repairs, installs and tunes up furnaces for homeowners across the entire state, from the Front Range to the Western Slope. One call reaches a dispatcher who knows the difference between a Boulder County high-efficiency unit and a 1990s standing-pilot furnace in Sterling. We work on Lennox, Carrier, Trane, Goodman, Rheem, York, Bryant, American Standard, Amana and Coleman equipment, and we stock parts for all of them.

What separates us is coverage and speed. We run trucks out of the Denver metro, Colorado Springs, Pueblo, Fort Collins, Greeley, Grand Junction and Durango, which means an emergency Furnace Repair Denver call at 2 a.m. gets a real arrival window, not a voicemail. Every tech holds NATE certification and works to ACCA standards, and we pull local building permits on replacements so your inspection passes the first time.

3,200+

Jobs Completed

4.9★

Google Rating

24/7

Emergency Line

Furnace Services We Handle Across Colorado

Whether your furnace is blowing cold air in December or you want a tune-up before the first hard freeze, we handle the full lineup. Every job starts with a real diagnosis, not a guess. If you have been searching for an affordable hvac contractor near me in Colorado, this is where that search ends.

Detailed view of torch welding metal surface, featuring blue flame.

Furnace Repair

Diagnosis and repair for furnaces that won't ignite, short cycle, trip the breaker or blow cold air. We test the flame sensor, igniter, gas valve and blower motor with a multimeter and combustion analyzer, then fix what's actually broken. Most repairs finish in one visit.

View Details
An electrician carefully examines a residential fuse box indoors, ensuring electrical safety and compliance.

Furnace Installation

New furnace installs sized to your square footage and Colorado altitude, not a one-size-fits-all box. We handle the plenum, duct sealant, thermostat wiring and permit. Nest and Honeywell thermostats get configured before we leave so you're not reading a manual at midnight.

View Details
Two auto mechanics engaged in vehicle repair work inside a dimly lit garage.

Furnace Replacement

When a cracked heat exchanger or failed control board makes repair pointless, we swap the unit. Old equipment comes out, new Lennox, Carrier or Trane goes in, and we haul the scrap. Typical replacement runs four to six hours for a standard 80% unit.

View Details
Detailed view of metal components in an automotive workshop. Focus on a cylindrical piece.

Furnace Tune-Up

A seasonal tune-up cleans the flame sensor, checks gas pressure with a manometer, inspects the heat exchanger and swaps your air filter. Book it in early fall before the first Front Range cold snap, when schedules fill up fast.

View Details
Hands tending to a warm, burning fireplace indoors, capturing the essence of comfort.

Furnace Maintenance

Ongoing maintenance keeps efficiency where it should be and catches worn capacitors and dirty flame sensors before they strand you. We log combustion readings each visit so you can see the trend, not just hear that everything looks fine.

View Details
Close-up of hands adjusting a boiler system with precise instrumentation, showing maintenance work.

Emergency Furnace Repair

No heat at 2 a.m. in a Colorado January is not a wait-until-Monday problem. We run 24/7 Furnace Repair in Colorado with on-call techs across the metro areas and mountain corridors. Call and you get a live dispatcher and a real arrival window.

View Details
A skilled technician works with a welding torch in an industrial setting, highlighting craftsmanship.

Gas Furnace Repair

Gas smells, pilot light out, furnace not igniting, banging noise on startup. We pressure-test the gas valve and manifold with a manometer, check the thermocouple and igniter, and confirm combustion with an analyzer before we call it done.

View Details
Detailed view of a glowing electric heating element with a coiled structure emitting heat.

Electric Furnace Repair

Electric furnaces fail differently: tripped breakers, dead heating elements, bad sequencers. We trace the circuit with a clamp meter, test each element, and replace what's failed. Common in mountain cabins and older Colorado Springs neighborhoods.

View Details
Technician repairing an air conditioner unit outdoors, wearing a facemask and using a manifold gauge.

High-Efficiency Furnace Repair

Condensing furnaces with 90%+ AFUE need techs who understand PVC venting, condensate traps and secondary heat exchangers. We service them daily. A leaking water puddle under a high-efficiency unit usually means a clogged condensate line, not a dead furnace.

View Details
A professional cleaner in a red uniform holding a vacuum near a van, ready for service.

Furnace Cleaning

Dust, pet hair and debris choke airflow and drive up gas bills. We pull the burners, clean the blower wheel, vacuum the cabinet and inspect the heat exchanger with an inspection camera. Worth doing every year in dusty or high-altitude homes.

View Details

Why Colorado Homeowners Call Us First

Plenty of companies advertise furnace work. Fewer actually show up prepared, on time, and with the parts to finish the job. Here's what that looks like in practice.

  • Trucks Stocked For Real Repairs Every truck carries igniters, flame sensors, thermocouples, capacitors, blower motors, gas valves and universal control boards. That means roughly 8 out of 10 repairs finish the same day instead of waiting on a parts order and a second trip.
  • Licensed, NATE-Certified Techs Our technicians hold NATE certification and work under a Colorado HVAC license, with EPA Section 608 handling for refrigerant work and OSHA safety compliance on every job site. We pull local building permits on installs and replacements so your inspection passes.
  • Statewide Coverage, One Phone Number From Grand Junction to Greeley, Durango to Fort Collins, one call reaches a dispatcher who knows which crew is closest. No transfers, no callbacks, no 'that's outside our service area.' We cover the whole state.
Close-up of mechanics working on a vehicle engine, showing teamwork and precision in car maintenance.

98%

Of our customers refer us within the first year.

Furnace Repair Pricing in Colorado

We quote flat rates before we start, so you know the number before the wrench comes out. Typical 2026 pricing across Colorado runs $89 to $2,400 depending on what's wrong. Diagnostic fee is credited toward the repair when you approve the work.

Diagnostic Visit

$89 flat rate

  • Full system inspection
  • Multimeter and combustion analyzer testing
  • Written repair quote before work starts
  • Fee credited toward approved repair
Book This Plan
Most Popular

Standard Repair

$180-$650 per job

  • Igniter, flame sensor or thermocouple replacement
  • Blower motor or capacitor replacement
  • Gas valve or control board swap
  • Same-day parts from truck stock
Book This Plan

Major Component Repair

$700-$2,400 per job

  • Heat exchanger replacement
  • Inducer motor and assembly repair
  • Full control board and wiring harness work
  • Post-repair combustion test and safety check
Book This Plan

How Our Furnace Repair Process Works

No mystery, no runaround. Here's exactly what happens from the moment you call until the heat is back on and we've walked you through what we found.

01

Call and Dispatch

You call (833) 588-3896 and reach a live dispatcher. We ask what the furnace is doing, confirm your address, and give you a real arrival window. Emergency calls get routed to the nearest on-call tech immediately.

02

On-Site Diagnosis

The tech tests the system with a multimeter, manometer and combustion analyzer. You get a plain-English explanation of what failed and a flat-rate quote before any work starts. No surprises on the invoice.

03

Repair and Test

We fix the problem, then run the furnace through a full cycle to confirm ignition, airflow and combustion readings. If something else looks worn, we tell you now instead of after it fails in February.

04

Walkthrough and Warranty

Before we leave, we show you what was replaced, how the thermostat should be set, and how often to change the filter. Parts and labor are warrantied, and the paperwork is emailed the same day.

Furnace Problems We Fix Across Colorado

Colorado furnaces take a beating: 8,000-foot altitude, dry air, and temperature swings that hit 60 degrees in a day. Here are the failures we see most, and how we handle them.

01

Furnace blowing cold air while the thermostat calls for heat

(Our Fix)Usually a dirty flame sensor, a failed igniter or a gas valve that isn't opening. We test each with a multimeter and combustion analyzer, clean or replace the failed part, and confirm the burners light on the first try before we leave.

02

Furnace short cycling every few minutes in a Front Range cold snap

(Our Fix)Short cycling points to an oversized unit, a clogged air filter or a failing high-limit switch. We check static pressure, airflow and temperature rise, then correct the cause. Most cases clear with a filter change and a blower adjustment.

03

Furnace tripping the breaker or making a banging noise on startup

(Our Fix)A tripped breaker often means a bad blower motor or capacitor drawing too many amps. Banging on startup usually signals delayed ignition. We clamp-meter the circuit, test the motor, and check the gas valve timing to isolate the real cause.

04

Furnace leaking water on the floor near a high-efficiency unit

(Our Fix)Condensing furnaces produce water, and a clogged condensate trap or frozen drain line sends it onto your floor. We clear the line, check the secondary heat exchanger, and confirm the trap drains properly before we leave.

05

Cracked heat exchanger on an older furnace in a mountain home

(Our Fix)A cracked heat exchanger is a carbon monoxide risk, not a repair-and-forget item. We inspect with an inspection camera, confirm the crack, and walk you through replacement options. If it's under warranty, we handle the paperwork.

Furnace Repair Coverage Across Colorado

We run service trucks out of the Denver metro, Colorado Springs, Pueblo, Fort Collins, Greeley, Grand Junction and Durango, which puts a tech within reach of nearly every Colorado address. Front Range suburbs, high-country towns at 9,000 feet, Western Slope ranches, Eastern Plains farmhouses. If you're searching for an hvac contractor near me anywhere in the state, we probably cover your ZIP.

Furnace Repair in Colorado: Common Questions

Straight answers to the questions we hear most from Colorado homeowners before they book a repair.

How much does Furnace Repair cost in Colorado?
Most repairs run $180 to $650, with a flat $89 diagnostic that gets credited toward the work. Major component jobs like heat exchanger or inducer motor replacement run $700 to $2,400. Replacement units start around $3,200 installed. Prices vary by region and equipment age, but you get a written quote before we start.
Who is the best hvac contractor in Colorado?
The best one shows up when they say they will, carries the parts to finish the job, and explains what failed in plain English. Look for NATE certification, a Colorado HVAC license, and trucks stocked with igniters, flame sensors and blower motors. We meet all three, and we cover the whole state, not just one metro.
Do you offer 24/7 emergency hvac contractor services in Colorado?
Yes. We run on-call technicians across the Denver metro, Colorado Springs, Pueblo, Fort Collins, Greeley, Grand Junction and Durango. Call (833) 588-3896 any hour and a live dispatcher answers with a real arrival window. No-heat calls in winter get priority routing to the nearest available tech.
How to choose a Furnace Repair company in Colorado?
Check three things: licensing, parts stock, and whether they quote before they work. A licensed Colorado HVAC contractor pulls permits on replacements. A well-stocked truck finishes most repairs same-day. And a flat-rate quote in writing before the wrench comes out means no surprise invoice. Ask all three questions before you book.
How long does a typical furnace repair take?
Most repairs finish in one to three hours on site. Igniter, flame sensor and thermocouple swaps run about an hour. Blower motor or control board replacements take two to three hours. If a part isn't on the truck, we usually get it the same day from a local supplier and come back the next morning.

Need Furnace Repair in Colorado Today?

No heat is not something to sleep on. Call (833) 588-3896 and a live dispatcher will get a tech headed your way with a real arrival window. Same-day service, flat-rate pricing, statewide coverage.

Call (833) 588-3896 Call Now

Get In Touch With Us

Call (833) 588-3896 any time, day or night. A live dispatcher answers, asks what your furnace is doing, and gives you a real arrival window. For non-emergency tune-ups and installs, email us and we'll get back to you the same business day.

Furnace Pros Colorado

  • Address

    Colorado

  • Hours

    Mon–Fri: 7AM – 7PM
    Sat: 8AM – 4PM
    Sun: Emergency Only
    24/7 Emergency Available

Tips, Specials, & Maintenance Reminders

Once-a-month email with seasonal tips, exclusive specials, and the kind of maintenance reminders that save you a callout.

Call (833) 588-3896 Get Quote
Call Quote